| Sign In | Join Free | My himfr.com |
|
Shanghai Shengli Machinery Manufacture Co., Ltd. Specializes in technology of mixing equipment and auxiliary.
7 Years
| Ask Lasest Price | |
| Brand Name : | Shengli |
| Model Number : | WLH |
| Certification : | CE and ISO |
| Price : | Negotiable |
| Payment Terms : | L/C, T/T |
| Supply Ability : | 200 - 300 SET PER MONTH |
| Delivery Time : | 1 MONTH |
Cardon Steel Single Shaft Paddle Mixer For Slurry Mixture With High Capacity
official website:www.1985shengli.com
Paddle blender is widely applied in chemical, biological,rubber and
PVC, PP, PE, ABS, plastic area.
It can mix granular material, plastic material in battery,
construction, environmental, mineral and agricultural line blending
process,especially for big size material or fragile material
single shaft mixers,blending mechinery, mixer for diet powder,powder mixing equipment manufacturer in China.
Single shaft mixers,blending mechinery, mixer for diet powder,powder mixing equipment manufacturer in China.
1, Scope of Application:
In the U-shaped container, there are positive and negative paddles.
Special proportion of the paddles agitator can be rectified with
the kind of material, quantity and the proportion of body. This
mixer has good effect on mixing viscosity or cohesion powder.
2, Characteristic:
a, Adjustable mixing speed can satisfy the rigorous demand or
gentle demand for the materials with different physical property.
b, The rotation is under critical speed, and the paddle is arc
shape, which is to avoid squeezing/crashing the fragile material,
so to reduce the effect of fragmentation to the material(e.g.
crystal particle). during the mixing
c, The paddle is arc shape, the big size powder will easily escape
from the small gap between agitator and tank, so the material won't
hurt the mixer but efficiently and well mix
d, The positive and negative paddles are set up at he same level, forming a mixing environment of low power but high efficiency.
e, Lower height of the container is convenient for installation.
f, This mixer can add ribbon near the shaft for big size mixer, in order to help move the material in the middle
g, The paddle can push the material into the middle to discharge fully
3, Working Principle:
a, The horizontal axes make the materials move up and down.
b, The outer paddle gathering the material from sides to center and
the inner paddle pushing the material from center to sides.
c, Every screw makes the materials do axial and radial movement,
the materials do relative cyclical movement so to gain the
intensive mixings ends.
4, Specification:
| Type(m3) | Power(kw) | Rotate Speed(R/min) | (kg)(m3)/Batch | Dimension(mm) | Weight |
| WLH-0.3 | 3 | 41 | <240 | 2300×680×1060 | 750 |
| WLH-0.5 | 5.5 | 41 | <400 | 2900×780×1240 | 1000 |
| WLH-1 | 11 | 33 | <800 | 3200×1000×1400 | 1800 |
| WLH-2 | 15 | 33 | <1600 | 3860×1200×1650 | 2200 |
| WLH-3 | 18.5 | 33 | <2400 | 4320×1300×1900 | 3200 |
| WLH-4 | 22 | 28 | <3200 | 4600×1400×2000 | 4000 |
| WLH-5 | 37 | 28 | <4000 | 4850×1500×2020 | 4650 |
| WLH-6 | 37 | 22 | <4800 | 5400×1560×2200 | 6280 |
| WLH-8 | 45 | 22 | <6400 | 5100×1720×2420 | 8500 |
| WLH-10 | 55 | 19 | <8000 | 5610×1750×2360 | 9300 |
| WLH-15 | 90 | 17 | <12000 | 5820×2000×2900 | 11000 |
| WLH-20 | 110 | 11 | <16000 | 6060×2630×3160 | 13500 |
5, Seal:
The mixing result and the clean after-mixing environment depend on the sealing property. Our company provides various sealing devices according to difference of materials. The normal sealing structure is stuff seal and also called TEFLON seal. After using for a period, user(s) should fasten and enhance it. However, the dynamic seal has a long-time sealing effect and is especially fit for the powder, liquid.
6, Feeding inlet on the body cover:
Two types:
a, used in the whole mixing/ blending process: in order to connect the feeding device, we design the connecting mouth.
b, used in the manual feeding: in order to operate and clean inside of the body, we design feeding inlet(s) or door(s).
Mild Steel Single Paddle Blender , High Power Horizontal Paddle Mixer
7, Discharging:
There is a discharging valve at the bottom of mixer body. When mixing different types of materials, we use flat discharging valve.
The operation of the discharging valve should be convenient and there are three types: manual, air driven and electricity driven.
The manual discharging is operated on the valve and the open extent is controlled by hand freely.
The air driven discharging valve, assembled with cylinder, work under the air pressure.
The electricity driven discharging valve works under control of electricity control box.
8, Extra function:
To realize the technicla of drying, cooling and keeping warm, the mixer can be added a jacket structure out of the tank. Hot water or steam or industrial oil can circulate int the jacket. Liquid filling system can be installed at the top cover, the different material of the atomized spray nozzle can realize the injecting of acid or alkali liquid, or water.
Mild Steel Single Paddle Blender , High Power Horizontal Paddle Mixer
slurry blender, granule mixer, granular blender,plastic blender,PVC mixer,single paddle blender
Single shaft paddle blender machine: simple production line blending machine with feeding machine
Shanghai Shengli specializes in mixing equipment research, design, manufacture, sales and service.
In past 30 years, we go deeply mixing processing filed and related technology, devote to research different kinds of mixer
modify and perfect existing mixing system, and develop new-type mixer equipment.
Under working experience, we developed mixer processing machinery independently.
Which payment terms can we accept?
1. Normally we can work on T/T term or L/C.
2. On T/T term,30% down payment is required in advance. And 70% balance shall be settled before shipment.
3. On L/C term, a 100% irrevocable L/C without soft clauses can be accepted. Please seek the advice form the individual sales manager whom you work with.
Delivery time
Normally, our delivery time is 45 days after we receive the deposit. If the order is big, we need to extend the delivery time.
What logistics ways we can work for shipment?
We can ship construction machinery by various transportation tools.
Normally, we will go by sea, to main continents, for light spare parts in urgent demand, we can ship it by international courier service. Such as DHL, TNT, UPS or FedEx.
Warranty time
We ensure one year warranty, lift-long service and provides technical support free of charge within or after warranty. Within the warranty period, we provide repair services for free. After the warranty period, we only charge cost of the required materials.
Can I visit your factory?
Yes, Many domestic and international customers visit our factory every year.
What's the quality of your products?
Parts of our products come with best quality, and our products passed CE certification. exported to lots countries around the world, such as Australia, Malaysia, Indonesia, Vietnam, Philippines, Korea, South Africa, USA, etc You can rest assured with the quality absolutely.
|
|
